Wheel And Tire System
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
- Turn ignition switch ON.
- Select "Self Diagnostic Result" mode in "AIR PRESSURE MONITOR" of "BCM".
- Check DTC.
Is DTC U1000 detected?
YES
Refer to Trouble Diagnosis Flow Chart .
NO
GO TO STEP 2 .
- CHECK COMBINATION METER
Check combination meter operation. Refer to CONSULT Function (METER/M&A) .
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Replace combination meter. Refer to Removal and Installation .
- CHECK LOW TIRE PRESSURE WARNING LAMP
Disconnect BCM harness connector.
Does the low tire pressure warning lamp activate?
YES
Replace BCM. Refer to Removal and Installation .
NO
Check combination meter operation.