Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring for EVAP canister vent control valve.
Do not add lubrication to the O-ring.
Make sure the surfaces that the O-ring comes in contact with are clean.
Make sure the O-ring is not twisted or rolled over.

Make sure the O-ring (1) is seated all the way down with no gap as shown below.

Courtesy of NISSAN NORTH AMERICA, INC.