Data Monitor

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Display item list

Monitor item [Unit]		Description
AMB TEMP SEN	[deg.C (deg.F)]	Ambient sensor value converted from ambient sensor signal received from ambient sensor.
IN-VEH TEMP	[deg.C (deg.F)]	In-vehicle sensor value converted from in-vehicle sensor signal received from in-vehicle sensor.
INT TEMP SEN	[deg.C (deg.F)]	Intake sensor value converted from intake sensor signal received from intake sensor.
SUNLOAD SEN	[w/m² ]	Sunload sensor value converted from sunload sensor signal received from sunload sensor.
AMB SEN CAL	[deg.C (deg.F)]	Ambient temperature value calculated by A/C auto amp.
IN-VEH CAL	[deg.C (deg.F)]	In-vehicle temperature value calculated by A/C auto amp.
INT TEMP CAL	[deg.C (deg.F)]	Front evaporator fin temperature value calculated by A/C auto amp.
SUNL SEN CAL	[w/m² ]	Sunload value calculated by A/C auto amp.
COMP REQ SIG	[On/Off]	Displays A/C switch ON/OFF status transmitted to other units via CAN communication.
FAN REQ SIG	[On/Off]	Displays front blower motor ON/OFF status transmitted to other units via CAN communication.
FAN DUTY	Duty ratio of front blower motor judged by A/C auto amp.
XM	Target discharge front air temperature (driver side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor.
RR XM	Target discharge rear air temperature judged by A/C auto amp. depending on the temperature setting and the value from each sensor.
PA TARGET A/TEMP	Target discharge front air temperature (passenger side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor.
ENG COOL TEMP	[deg.C (deg.F)]	Engine coolant temperature signal value received from ECM via CAN communication.
VEHICLE SPEED	[km/h (mph)]	Vehicle speed signal value received from combination meter via CAN communication.
GAS SENSR DETECT LEVEL	Displays value according to contamination of ambient air.
TRI ZONE XM	Target discharge tri zone air temperature judged by A/C auto amp. depending on the temperature setting and the value from each sensor.
BOOSTR FAN RQST SIGNAL	[On/Off]	Displays rear blower motor ON/OFF status transmitted to other units via CAN communication.
BOOSTER FAN DUTY	Duty ratio of rear blower motor judged by A/C auto amp.
PASS SUNL CAL	[w/m² ]	Sunload value (passenger side) calculated by A/C auto amp.
PASS SUNLOAD SEN	[w/m² ]	Sunload sensor value calculated from sunload sensor signal (passenger side) received from sunload sensor.