LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System (W/ Intelligent Cruise Control) (2 Of 2)) >> Removal And Installation >> VDC Off Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument lower panel LH. Refer to Removal and Installation .
  2. Remove screws (A), then remove switch carrier (1) from instrument lower panel LH.
    GNSALJIA1726Z-726Courtesy of NISSAN NORTH AMERICA, INC.
  3. Using suitable tool, release pawls and remove VDC OFF switch.
    GNSALJIA1522Z-522Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl