LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System (W/ Intelligent Cruise Control) (2 Of 2)) >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VDC OFF SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect VDC OFF switch harness connector.
    3. Check the continuity between terminals of VDC OFF switch connector.

      VDC OFF switch

      Condition

      Continuity

      Terminals

      6 - 8

      When VDC OFF switch is pressed

      Yes

      When VDC OFF switch is not pressed

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace the VDC OFF switch. Refer to Removal and Installation .