Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PARKING BRAKE SWITCH

Turn the ignition switch OFF.
Disconnect parking brake switch harness connector.

Check the continuity between parking brake switch terminal and ground.

Parking brake switch	-	Condition	Continuity
Terminal
1	Ground	When parking brake switch is pressed	Yes
		When parking brake switch is released	No

Is the inspection result normal?

YES

Inspection End.

Replace the parking brake switch. Refer to Removal and Installation .