LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System (W/ Intelligent Cruise Control) (2 Of 2)) >> DTC/Circuit Diagnosis >> C1155 Brake Fluid Level Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BRAKE FLUID LEVEL SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect brake fluid level switch harness connector.
    3. Check the continuity between terminals of brake fluid level switch.

      Brake fluid level switch

      Condition

      Continuity

      Terminals

      1 - 2

      When brake fluid level in reservoir tank is within the specified level.

      No

      When brake fluid level in reservoir tank is less than the specified level.

      Yes

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace the reservoir tank. Refer to Exploded View .