LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Engine Control System (DTC/Circuit Diagnosis) (13 Of 17)) >> DTC/Circuit Diagnosis >> DTC P2118: Throttle Control Motor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THROTTLE CONTROL MOTOR OUTPUT SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect electric throttle control actuator harness connector.
    3. Disconnect ECM harness connector.
    4. Check the continuity between electric throttle control actuator harness connector and ECM harness connector.

      Electric throttle control actuator

      ECM

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      F50

      2

      F79

      150

      Existed

      149

      Not existed

      1

      150

      Not existed

      149

      Existed

    5. Also check harness for short to power and short to ground.

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Repair or replace error-detected parts.

  2. CHECK THROTTLE CONTROL MOTOR 

    Check the throttle control motor. Refer to Component Inspection .

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace electric throttle control actuator. Refer to INTAKE MANIFOLD COLLECTOR .