LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 352 (Engine Control System (3 Of 6)) >> Diagnosis System (ECM) >> On Board Diagnosis Function >> SRT Status Mode

SRT Status Mode

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Description 

This function allows to read if ECM has completed the self-diagnoses of major emission control systems and components. For SRT, refer to System Readiness Test (SRT) Code .

Operation Procedure 

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown below.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
    G05868475Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals