LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (Engine Control System (DTC/Circuit Diagnosis) (16 Of 17)) >> DTC/Circuit Diagnosis >> Electrical Load Signal >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The electrical load signal (Headlamp switch signal, rear window defogger switch signal, etc.) is transferred via the CAN communication line.

  1. INSPECTION START 

    Confirm the malfunctioning circuit (rear window defogger, headlamp or heater fan). Refer to Component Function Check .

    Which circuit is related to the incident?

    Rear window defogger

    GO TO 2.

    Headlamp

    GO TO 3.

    Heater fan

    GO TO 4.

  2. CHECK REAR WINDOW DEFOGGER SYSTEM 

    Refer to Work Flow .

    INSPECTION END

  3. CHECK HEADLAMP SYSTEM 

    Refer to Work Flow .

    INSPECTION END

  4. CHECK HEATER FAN CONTROL SYSTEM 

    Refer to Work Flow .

    INSPECTION END