Inspection Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK AEB SYSTEM SETTING
1. Start the engine.
2. Check that the AEB system setting can be enabled/disabled on the vehicle information display.
3. Turn the ignition switch OFF and wait for 30 seconds or more.
4. Check that the previous setting is saved when the engine starts again.
GO TO 2 .
CHECK AEB SYSTEM
1. Enable the setting of the AEB system on the vehicle information display.
2. Check that AEB warning lamp is OFF.
Inspection End.