Welcome Light Function Setting
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Welcome light function operation mode can be changed using CONSULT
With CONSULT
Refer to CONSULT Function (BCM - INTELLIGENT KEY) .
Without CONSULT
The welcome light function ON/OFF can be switched by performing the following operation.
- Turn ignition switch: OFF->ON
- Press and hold the driver side door request switch for 5 seconds or more within 20 seconds after turning the ignition switch ON.
- The switching is complete when combination meter buzzer sounds.