Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT
1. Start the engine.
2. Select "Data Monitor" in "TRANSMISSION".
3. Select "RANGE".
4. Shift selector lever.
5. Check that selector lever position, "RANGE" on CONSULT screen, and shift position indicator display on combination meter are identical.
Is the check result normal?

YES

INSPECTION END

NO

Check "Self Diagnostic Result" in "TRANSMISSION".

NO

Check "Self Diagnostic Result" in "TRANSMISSION".

NO

Check "Self Diagnostic Result" in "METER/M&A".