Disassembly and Assembly: Disassembly
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not disassemble the cylinder body.
- Remove the reservoir tank only when necessary.
- Do not drop removed parts. The parts must not be reused if they are dropped.
- Secure the master cylinder assembly in a vise.CAUTION: Always use copper plates or cloth between vise and cylinder body. Do not overtighten the vise.
- Remove the reservoir tank pin using suitable tools.CAUTION: Do not reuse the pin.
- Remove the reservoir tank and grommets from the cylinder body. Discard the grommets.CAUTION:
- Do not drop parts. Dropped parts must not be reused.
- Do not reuse the grommets.