LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Parking Brake System) >> Removal And Installation >> Parking Brake Shoe >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Clean brakes with a vacuum dust collector to minimize the hazard of air borne particles or other materials.
  • Clean dust on disc brake rotor and back plate using a vacuum dust collector. Do not blow with compressed air.
  1. Remove rear wheels and tires using power tool. Refer to Removal and Installation .
  2. Remove disc brake rotor. Refer to Removal and Installation .
    CAUTION:
    • Parking brake must be in the completely released position.
    • Put matching marks on both disc brake rotor and wheel hub when removing disc brake rotor.
  3. If disc brake rotor cannot be removed, remove as follows:
    1. Secure disc brake rotor with wheel nuts and remove adjuster hole plug.
    2. Using suitable tool, rotate adjuster (1) in direction (B) to retract and loosen brake shoe as shown.
      GNSJPFIB07Z-007Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove anti-rattle pins, retainers, anti-rattle springs, return spring and adjuster spring.
    CAUTION: Do not drop the removed parts.
  5. Remove parking brake shoes, adjuster, and toggle lever.
    CAUTION:
    • The parking brake shoes for the front side are made of different materials from those for the rear side. Do not misidentify them when removing.
    • Do not drop the removed parts.
scientia non olet · About LEMON Manuals