LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Body Control System) >> Removal And Installation >> Combination Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering wheel. Refer to Removal and Installation .
  2. Remove the steering column covers. Refer to Removal and Installation .
  3. Remove the combination switch screws.
  4. Disconnect the harness connector from the combination switch and remove.
scientia non olet · About LEMON Manuals