Conditions of Vehicle (Operating Conditions)

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

"ENGINE START BY I-KEY" in "WORK SUPPORT" is ON when setting on CONSULT.
One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.

PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".

Refer to CONSULT Function (BCM - INTELLIGENT KEY) .

GO TO 2.
PERFORM SELF-DIAGNOSTIC RESULT
Perform self diagnostic result.

Are any DTCs detected?

YES

Refer to DTC Index .

NO

GO TO 3.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.

Refer to Component Function Check .

Is the operation normal?

YES

GO TO 4.

NO

Repair or replace malfunctioning parts.
CONFIRM THE OPERATION
Confirm the operation again.

Is the inspection normal?

YES

Check intermittent incident. Refer to Intermittent Incident .

NO

GO TO 1.