Detail Of Trouble Diagnosis Flow Chart

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

INTERVIEW WITH CUSTOMER
Interview with the customer is important to detect the root cause of CAN communication system errors and to understand vehicle condition and symptoms for proper trouble diagnosis.

Points in interview
- What: Parts name, system name
- When: Date, Frequency
- Where: Road condition, Place
- In what condition: Driving condition/environment
- Result: Symptom
Notes for checking error symptoms:
- Check normal units as well as error symptoms.
  - Example: Circuit between ECM and the combination meter is judged normal if the customer indicates tachometer functions normally.
- When a CAN communication system error is present, multiple control units may malfunction or go into fail-safe mode.
- Indication of the combination meter is important to detect the root cause because it is the most obvious to the customer, and it performs CAN communication with many units.
Courtesy of NISSAN NORTH AMERICA, INC.

GO TO 2.
INSPECTION OF VEHICLE CONDITION
Check whether the symptom is reproduced or not.

NOTE: Do not turn the ignition switch OFF or disconnect the 12V battery cable while reproducing the error. The error may temporarily correct itself, making it difficult to determine the root cause.

GO TO 3.

CHECK OF CAN SYSTEM TYPE (HOW TO USE CAN SYSTEM TYPE SPECIFICATION CHART)

Determine CAN system type based on vehicle equipment.

NOTE:

This chart is used if CONSULT does not automatically recognize CAN system type.
There are two styles for CAN system type specification charts. Depending on the number of available system types, either style A or style B may be used.

CAN System Type Specification Chart (Style A)

NOTE: CAN system type is easily checked with the vehicle equipment identification information shown below.

Courtesy of NISSAN NORTH AMERICA, INC.

CAN System Type Specification Chart (Style B)

NOTE: CAN system type is easily checked with the vehicle equipment identification information shown below.

Courtesy of NISSAN NORTH AMERICA, INC.

GO TO 4.

CREATE INTERVIEW SHEET
Fill out the symptom described by the customer, vehicle condition, and CAN system type on the interview sheet.

NOTE: Interview Sheet (Example)

Courtesy of NISSAN NORTH AMERICA, INC.

GO TO 5.
DETECT THE ROOT CAUSE
CAN diagnosis function of CONSULT detects a root cause.

GO TO 6.
REPAIR OR REPLACE MALFUNCTIONING PART
Repair or replace malfunctioning parts identified by CAN diagnosis function of CONSULT.

CAN communication circuit

Refer to CAN Communication Circuit - Early Production , CAN Communication Circuit - Late Production

ITS communication circuit

Refer to ITS Communication Circuit - Early Production , ITS Communication Circuit - Late Production .

Chassis communication circuit

Refer to Chassis Communication Circuit .

IT CAN communication circuit

Refer to IT CAN Communication Circuit .

Diagnostic CAN communication circuit

Refer to Diagnostic CAN Communication Circuit - Early Production , Diagnostic CAN Communication Circuit - Late Production .