Meter System: Fail-safe

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

The combination meter activates the fail-safe control if the CAN communication lines between each unit are malfunctioning.

Function		Specifications
Speedometer		Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control		When suspending communication, it changes to nighttime mode.
Buzzer		Turns OFF by suspending communication.
Information display	Current fuel consumption	The last result calculated during normal condition is indicated.
	Average fuel consumption
	Average vehicle speed
	Range (Distance to empty)
	Driving distance
	Door open warning	The display turns OFF by suspending communication.
	Trunk open warning
	Low tire pressure warning
	Parking brake release warning
	Fuel-filler cap warning
	Oil pressure warning
	CVT error warning lamp
	BSW warning
	Odo/trip meter	An indicated value is maintained at communications blackout.
	Shift selector position indicator	The indicator turns OFF by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp	Turns ON by suspending communication.
	Brake warning lamp
	EPS warning lamp
	VDC warning lamp
	AEB warning lamp (if equipped)
	Malfunction indicator lamp
	Air bag warning lamp
	Charge warning lamp
	VDC OFF indicator lamp	Turns OFF by suspending communication.
	High beam indicator lamp
	Turn signal indicator lamp
	Position lamp indicator lamp
	Front fog lamp indicator lamp
	Low tire pressure warning lamp	After blinking for 1 minute, the lamp remains ON.