Data Monitor

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER

[mph or km/h]

X

Displays the value of vehicle speed signal.

SPEED OUTPUT

[mph or km/h]

X

Vehicle speed signal value transmitted to other units via CAN communication.

ODO OUTPUT

[mph or km/h]

Odometer signal value transmitted to other units via CAN communication.

TACHO METER

[rpm]

X

Value of the engine speed signal received from ECM via CAN communication.

FUEL METER

[L]

X

Fuel level indicated on combination meter.

W TEMP METER

[°F] or [°C]

X

Displays the value of engine coolant temperature signal, which is input from ECM.

ABS W/L

[On/Off]

Displays [ON/OFF] condition of ABS warning indicator.

VDC/TCS IND

[On/Off]

Displays [ON/OFF] condition of VDC OFF indicator lamp.

SLIP IND

[On/Off]

Displays [ON/OFF] condition of SLIP indicator lamp.

BRAKE W/L

[On/Off]

Displays [ON/OFF] condition of brake warning indicator.

DOOR W/L

[On/Off]

Displays [ON/OFF] condition of door warning message in the information display.

TRUNK/GLAS-H

[On/Off]

Displays [ON/OFF] condition of trunk warning message in the information display.

HI-BEAM IND

[On/Off]

Displays [ON/OFF] condition of high beam indicator.

TURN IND

[On/Off]

Displays [ON/OFF] condition of turn indicator.

LIGHT IND

[On/Off]

Displays [ON/OFF] condition of light indicator.

FR FOG IND

[On/Off]

Displays [ON/OFF] condition of front fog lamp indicator.

OIL W/L

[On/Off]

Displays [ON/OFF] condition of low oil pressure warning message in the information display.

MIL

[On/Off]

Displays [ON/OFF] condition of malfunction indicator.

BA W/L

[On/Off]

Displays [ON/OFF] condition of AEB warning lamp indicator.

ATC/T-AMT W/L

[On/Off]

Displays [ON/OFF] condition of CVT error warning message in the information display.

SPORT IND

[On/Off]

Displays [ON/OFF] condition of SPORT indicator in the information display.

FUEL W/L

[On/Off]

Displays [ON/OFF] condition of low-fuel warning message in the information display.

WASHER W/L

[On/Off]

Displays [ON/OFF] condition of low washer fluid warning message in the information display.

AIR PRES W/L

[On/Off]

Displays [ON/OFF] condition of tire pressure warning lamp.

KEY G/Y W/L

[On/Off]

Displays [ON/OFF] condition of key green warning lamp.

EPS W/L

[On/Off]

Displays [ON/OFF] condition of EPS warning indicator.

LCD

X

Displays the value of Intelligent Key system message indication.

ACC TARGET

[On/Off]

Displays [ON/OFF] condition of vehicle ahead detection indicator in the information display.

ACC DISTANCE

[Off, Short, Middle, Long]

Displays [Off, Short, Middle, Long] condition of set distance indicator in the information display.

SHIFT IND

[P, R, N, D]

Displays shift selector position.

FUEL CAP W/L

[On/Off]

Displays [ON/OFF] condition of loose fuel cap warning message in the information display.

M RANGE SW

[On/Off]

Displays [ON/OFF] condition of manual mode switch.

NM RANGE SW

[On/Off]

Displays [ON/OFF] condition of non-manual mode switch.

AT SFT UP SW

[On/Off]

Displays [ON/OFF] condition of manual mode shift up switch.

AT SFT DWN SW

[On/Off]

Displays [ON/OFF] condition of manual mode shift down switch.

ST SFT UP SW

[On/Off]

Displays [ON/OFF] condition of paddle shift up switch.

ST SFT DWN SW

[On/Off]

Displays [ON/OFF] condition of paddle shift down switch.

PKB SW

[On/Off]

Displays [ON/OFF] condition of parking brake switch.

BUCKLE SW

[On/Off]

Displays [ON/OFF] condition of seat belt buckle switch LH.

BRAKE OIL SW

[On/Off]

Displays [ON/OFF] condition of brake fluid level switch.

DISTANCE

[Mi] or [km]

Displays distance to empty.

OUTSIDE TEMP

[°F or °C]

Displays the ambient air temperature which is input from the ambient sensor.

FUEL LOW SIG

[On/Off]

Displays [ON/OFF] condition of low-fuel warning signal.

BUZZER

[On/Off]

X

Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter.

TM OIL TMP

[°F or °C]

Displays value of CVT fluid temperature signal is received from TCM via CAN communication.

TPMS PRESS L

[On/Off]

Displays [ON/OFF] condition of tire pressure low message in the information display.

ASCD SPD BLNK

[On/Off]

Displays [ON/OFF] status of blinking condition of ASCD set vehicle speed judged by the ASCD status signal received from ECM via CAN communication.

ASCD STATUS

[Off, ASCD, CRUISE]

Displays [OFF, ASCD, CRUISE] of ASCD status display judged by the ASCD status signal received from ECM via CAN communication.

ASCD REQ SPD

[mph/Off]

ASCD set vehicle speed value judged by the ASCD status signal received from ECM via CAN communication.

TPMS DISP

[Not support, HIGH, MEDIUM, LOW]

Status of tire pressure low from tire pressure data signal is received from BCM via CAN communication.

TIRE STATUS FR

[On/Off]

Displays [ON/OFF] status of tire pressure data signal front RH from BCM via CAN communication.

TIRE STATUS FL

[On/Off]

Displays [ON/OFF] status of tire pressure data signal front LH from BCM via CAN communication.

TIRE STATUS RR

[On/Off]

Displays [ON/OFF] status of tire pressure data signal rear RH from BCM via CAN communication.

TIRE STATUS RL

[On/Off]

Displays [ON/OFF] status of tire pressure data signal rear LH from BCM via CAN communication.

STRG SW INPUT

[SW1-SW10, NO INPUT]

Displays status of steering switch.

SONAR DET STATUS

[On/Off]

Displays [ON/OFF] activation status of sonar system received from sonar control unit via CAN communication.

SONAR WARN

[Off/DEACT/ERROR]

Displays status of parking sensor error detected from parking sensor error signal is received from sonar control unit via CAN communication.

SONAR DET DSP RL

[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Displays status of corner sensor rear LH detection obstacle from sonar control unit via CAN communication.

SONAR DET DSP AREA RL

[On/Off]

Displays [ON/OFF] activation status of corner sensor rear LH judged from a sonar indicator signal received from the sonar control unit via CAN communication.

SONAR DET DSP RR

[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Displays status of corner sensor rear RH detection obstacle from sonar control unit via CAN communication.

SONAR DET DSP AREA RR

[On/Off]

Displays [ON/OFF] activation status of corner sensor rear RH judged from a sonar indicator signal received from the sonar control unit via CAN communication.

SONAR DET DSP FL

[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Displays status of corner sensor front LH detection obstacle from sonar control unit via CAN communication.

SONAR DET DSP AREA FL

[On/Off]

Displays [ON/OFF] activation status of corner sensor front LH judged from a sonar indicator signal received from the sonar control unit via CAN communication.

SONAR DET DSP FR

[LEVEL1/LEVEL2/LEVEL3/LEVEL4]

Displays status of corner sensor front RH detection obstacle from sonar control unit via CAN communication.

SONAR DET DSP AREA FR

[On/Off]

Displays [ON/OFF] activation status of corner sensor front RH judged from a sonar indicator signal received from the sonar control unit via CAN communication.

SONAR DIST DSP

[Off/stop/30cm/40cm/50cm/60cm]

Sonar of information display of sonar sensor detection distance from sonar control unit via CAN communication.

SET BSW

[On/Off/Not support]

Status of BSW system setting.

TIRE PRESS FR

[kPa, kg/cm2 or Psi]

Displays the data of front RH tire pressure from BCM via CAN communication.

TIRE PRESS FL

[kPa, kg/cm2 or Psi]

Displays the data of front LH tire pressure from BCM via CAN communication.

TIRE PRESS RR

[kPa, kg/cm2 or Psi]

Displays the data of rear RH tire pressure from BCM via CAN communication.

TIRE PRESS RL

[kPa, kg/cm2 or Psi]

Displays the data of rear LH tire pressure from BCM via CAN communication.

BSW IND

[On/Off]

Displays [ON/OFF] condition of blind spot warning indicator.

CHASSIS CONTROL WARN

[On/Off]

Displays [ON/OFF] condition of chassis control system error warning message in the information display.