LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Meter, Warning Lamp & Indicator) >> Symptom Diagnosis >> The Oil Pressure Warning Continues Displaying, Or Does Not Display >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COMBINATION METER INPUT 

    SYMBOL CONSULT

    1. Start the engine.
    2. Select "Data Monitor" mode of "METER/M&A".
    3. Select "OIL W/L".
    4. Check that the function operates normally according to the following conditions:

    Monitor item

    Condition

    CONSULT

    OIL W/L

    Engine running

    Off

    Is the inspection result normal?

    YES

    Replace combination meter. Refer to Removal and Installation .

    NO

    Perform "Self Diagnostic Result" of "ECM". Refer to CONSULT Function .