Component Inspection (EOP sensor)
WARNING: This page is about a different car, the 2018 Nissan NV3500 HD and 2018 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EOP SENSOR
- Turn ignition switch OFF.
- Disconnect EOP sensor harness connector.
- Check resistance between EOP sensor connector terminals.
+
-
Condition
Resistance (kΩ)
EOP sensor
Terminal
1
2
None
4 kΩ - 10 kΩ
3
2 kΩ - 8 kΩ
2
1
4 kΩ - 10 kΩ
3
1 kΩ - 3 kΩ
3
1
2 kΩ - 8 kΩ
2
1 kΩ - 3 kΩ
Is the inspection result normal?
YES
INSPECTION END.
NO
Replace EOP sensor. Refer to Exploded View .