Removal and Installation - Front Expansion Valve: Installation
WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
|
Expansion valve bolts |
: 4 N.m (0.4 kg-m, 35 in-lb) |
CAUTION:
- Do not reuse the O-rings.
- Apply compressor oil to the new O-rings for installation.
- Keep the O-rings free from any lint or dirt. Contamination will affect the O-ring seal and can cause a leak.
- After charging refrigerant, check for leaks.