LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Heater & Air Conditioning System) >> Removal And Installation >> Cooler Pipe And Hose >> Low-Pressure Flexible Hose >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to HFC-134a (R-134a) Service Procedure .
  2. Disconnect the low pressure flexible hose from the low pressure pipe.
  3. Disconnect the low-pressure flexible hose from the compressor.
    NOTE: Cap the low-pressure flexible hose and port on the compressor to prevent contamination.
  4. Remove the low-pressure flexible hose.