Work Support

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Item name	Description
CONFORM CVTF DETERIORTN	Checks the degradation level of the CVT fluid under severe conditions.
G SENSOR CALIBRATION	Compensates the G sensor.
ERASE LEARNING VALUE*	Erases learning value memorized by TCM.
ENGINE BRAKE ADJ.	Although there is no malfunction on the transaxle and the CVT system, if a customer makes a complaint like "I do not feel comfortable with automatic operation of the engine brake on downhill", the engine brake can be cancelled by "engine brake adjustment".
FWD CLUTCH POINT LEARNING	Allows learning of the forward clutch engagement point.
WRITE IP CHARA - REPLACEMENT AT/CVT	Writes IP characteristics when transaxle assembly is replaced.
READ IP CHARA - REPLACEMENT TCM	Reads IP characteristics when TCM is replaced.
WRITE IP CHARA - REPLACEMENT TCM	Writes IP characteristics when TCM is replaced.
CVT INSPECTION ^*	X

*: This item is not used.

Check the degradation level of the CVT fluid.

CVTF degradation level data
210, 000 or more	: Replacement of the CVT fluid is required.
Less than 210, 000	: Replacement of the CVT fluid is not required.

Engine brake adjustment

ENGINE BRAKE LEVEL
ON	: Turn ON the engine brake control.
OFF	: Turn OFF the engine brake control.