LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Engine Control System (DTC/Circuit Diagnosis) (4.0L) (3 Of 4)) >> DTC/Circuit Diagnosis >> DTC P0850: PNP Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM COMPONENT FUNCTION CHECK 
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector terminals as per the following conditions.

      ECM

      Condition

      Voltage

      (Approx.)

      Connector

      +

      -

      Terminal

      E16

      118

      128

      Selector lever

      P or N

      Battery voltage

      Except above

      0 V

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Proceed to Diagnosis Procedure .

scientia non olet · About LEMON Manuals