LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Control System (DTC/Circuit Diagnosis) (4.0L) (4 Of 4)) >> DTC/Circuit Diagnosis >> Ignition Signal >> Component Inspection (Condenser-1)

Component Inspection (Condenser-1)

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONDENSER-1 
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      G04075318Courtesy of NISSAN NORTH AMERICA, INC.

      Condenser-1

      Resistance

      +

      -

      Terminal

      1

      2

      Above 1MΩ[at 25°C (77°F)]

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace condenser.