LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Control System (DTC/Circuit Diagnosis) (4.0L) (4 Of 4)) >> DTC/Circuit Diagnosis >> DTC P1564: ASCD Steering Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ASCD STEERING SWITCH 
    1. Disconnect spiral cable harness connector.
    2. Check the resistance between spiral cable harness connector terminals as per the following conditions.
      GNSJPBIA5398Z-398Courtesy of NISSAN NORTH AMERICA, INC.

      Spiral cable

      Condition

      Resistance

      (Approx.)

      Connector

      +

      -

      Terminals

      M30

      25

      32

      MAIN switch: Pressed

      0 Ω

      CANCEL switch: Pressed

      250 Ω

      COAST/SET switch: Pressed

      660 Ω

      ACCEL/RES switch: Pressed

      1, 480 Ω

      All ASCD steering switches: Released

      4, 000 Ω

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace ASCD steering switch. Refer to Exploded View .