Component Inspection (Park Position Switch)
WARNING: This page is about a different car, the 2018 Nissan NV3500 HD and 2018 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK PARK POSITION SWITCH (KEY LOCK)
Apply voltage to terminals of shift lock solenoid and park position switch (key lock) connector and check that shift lock solenoid is activated.
CAUTION:- Connect the fuse between the terminals when applying the voltage.
- Never cause shorting between terminals.
+
-
Condition
Status
Shift lock solenoid
Terminals
3
1
Apply 12 V between terminals 3 and 1 with the park position switch (key lock) in the other positions except "P" (park).
Shift lock solenoid operates.
Is the inspection result normal?
YES
Inspection End.
NO
Replace A/T shift selector. Refer to Removal and Installation .