LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Re5RO5A)) >> Removal And Installation >> A/T Shift Selector >> Inspection and Adjustment >> Adjustment Of A/T Position

Adjustment Of A/T Position

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the parking brake.
    CAUTION: Make sure the vehicle cannot move with parking brake set.
  2. Loosen control cable nut.
    G04149276Courtesy of NISSAN NORTH AMERICA, INC.
  3. Place the manual lever and shift selector in "P" position.
  4. Push the control cable in the direction shown above, with a force of 9.8 N (1kg-f, 2.2 lb-f), then release the cable and temporarily tighten control cable nut.
    CAUTION: Do not apply any load to the manual lever.
    NOTE: Make sure the manual lever stays in "P" position.
  5. Tighten the control cable nut to the specified torque.

    Control cable nut

    : 14.5 N.m (1.5 kg-m, 11 ft-lb)
  6. Check the operation of the A/T.
scientia non olet · About LEMON Manuals