Special Repair Requirement

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

X: Applicable

Part name	Service performed		Required service	Reference
	Replacement	Removal ^*1
ECM	X	Additional service when replacing ECM			Work Procedure
	X		Accelerator pedal released position learning	Work Procedure
			Throttle valve closed position learning	Work Procedure
			Idle air volume learning	Work Procedure
			VIN registration	Work Procedure
Accelerator Pedal	X	X	Accelerator pedal released position learning	Work Procedure
Electric throttle	X	X	Throttle valve closed position learning	Work Procedure
	X	Idle air volume learning		Work Procedure
Engine assembly	X	Throttle valve closed position learning ^*2			Work Procedure
		Idle air volume learning ^*2	Work Procedure
	X		Accelerator pedal released position learning	Work Procedure
			Throttle valve closed position learning ^*2	Work Procedure

*1: Harness connector disconnection included.

*2: Replacement of engine with a electric throttle.