Charging System

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL

Disconnect the negative battery terminal. Refer to Removal and Installation .
Remove the front under cover using power tool. Refer to Removal and Installation .
Remove the fender protector (RH). Refer to Removal and Installation .
Remove the air duct and resonator assembly. Refer to Removal and Installation .
Remove the crankcase ventilation hose.
Remove the drive belt. Refer to Removal and Installation .
Remove the generator stay using a suitable tool.
Remove the generator upper bolt using a suitable tool.
Disconnect the harness connectors from generator.
Remove the generator.

Installation

Installation is in the reverse order of removal.

Install the generator and confirm the drive belt is within the allowable working range. Refer to Checking Drive Belts .

CAUTION: Tighten terminal nut carefully.

Terminal nut

: 10.8 N.m (1.1 kg-m, 8 ft-lb)