Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
CAUTION:
- Because vacuum hose contains a check valve, vacuum hose must be installed in correct position for proper operation. Refer to stamp on end of vacuum hose to confirm correct installation. The brake booster will not operate normally if vacuum hose with check valve is installed in wrong direction.
- Insert vacuum pipe into vacuum hose at least 24 mm (0.94 in) as shown, above.
- Do not use lubricating oil during installation.