LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Brake System) >> Removal And Installation >> Front Disc Brake >> Brake Pad >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Observe brake fluid level in reservoir tank. Partially drain brake fluid if necessary. Refer to Drain and Refill .
    CAUTION: Do not reuse drained brake fluid.
  2. Remove front wheels and tires using a power tool. Refer to Removal and Installation .
  3. Remove upper and lower slide pin bolts.
    NOTE: Note slide pin orientation during removal. The upper slide pin contains a bushing.
  4. Remove brake caliper from torque member. Leaving brake hose attached, reposition brake caliper aside with wire.
  5. Remove brake pads, shims, shim covers, pad retainers, and anti-rattle clips from torque member.
    CAUTION:
    • Do not reuse the pad retainers and anti-rattle clips.
    • Do not damage the piston boot.
    • Do not drop the brake pads, shims, or the shim covers.
    • Note the position of components during removal to aid with installation.
scientia non olet · About LEMON Manuals