LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Brake System) >> Removal And Installation >> Front Disc Brake >> Brake Caliper Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove reservoir cap from reservoir tank.
  2. Remove front wheels and tires using a power tool. Refer to Removal and Installation .
  3. Remove union bolt and then remove brake hose from brake caliper assembly. Discard copper sealing washers.
    CAUTION: Do not reuse copper sealing washers.
  4. Remove upper and lower slide pin bolts.
    NOTE: Note slide pin orientation during removal. The upper slide pin contains a bushing.
  5. Remove brake caliper from the torque member.
  6. Remove brake pads and shims from torque member.
scientia non olet · About LEMON Manuals