Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove cap from reservoir tank.
- Remove wheels and tires using a power tool. Refer to Removal and Installation .
- Loosen flare nut with a flare nut wrench and separate brake tube from hose.CAUTION:
- Do not scratch flare nut and brake pipe.
- All brake hoses and pipes must be free from excessive bending, twisting and pulling.
- Remove lock plate and remove brake hose.
- Remove union bolt (A) and brake hose from brake caliper. Remove and discard copper sealing washers.CAUTION: Do not reuse copper sealing washers.