LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Engine Mechanical (4.0L)) >> Removal And Installation >> Intake Valve Timing Control >> Intake Valve Timing Control Solenoid Valve (RH) >> Removal

Intake Valve Timing Control Solenoid Valve (RH): Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold collector. Refer to Removal and Installation .
  2. Disconnect the harness connector from intake valve timing control solenoid valve (RH). Refer to Exploded View .
  3. Remove intake valve timing control solenoid valve (RH), bolts, O-ring and gasket from camshaft bracket number one.
    CAUTION: Do not reuse O-ring or gasket.
scientia non olet · About LEMON Manuals