LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Engine Mechanical (4.0L)) >> Removal And Installation >> Intake Manifold >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold collector. Refer to Removal and Installation .
  2. Remove fuel tube and fuel injector assembly. Refer to Removal and Installation .
  3. Loosen nuts and bolts in the order as shown below, to remove the intake manifold.
    Fig 1: Intake Manifold Nuts And Bolts Loosening Sequence
    G08161221Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Front

  4. Remove gaskets.
    CAUTION: Cover engine openings to avoid entry of foreign materials.
scientia non olet · About LEMON Manuals