LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Propeller Shaft (3S1415)) >> Unit Removal And Installation >> Propeller Shaft Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD and 2018 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the A/T shift selector to the (N) position and release the parking brake.
  2. Put matching marks on the rear propeller shaft flange yoke and the companion flange of the rear final drive as shown.
    GNSALDIA0233Z-233Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: For matching marks, use paint. Do not damage the rear propeller shaft flange yoke or the companion flange.
  3. Remove the center support bearing nuts.
    GNSALDIA0232Z-232Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the nuts and bolts from the propeller shaft and rear final drive, and remove the propeller shaft.
scientia non olet · About LEMON Manuals