LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Front Axle) >> Removal And Installation >> Front Drive Shaft >> Removal and Installation (LH) >> Inspection And Adjustment After Installation

Inspection And Adjustment After Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check CVT fluid level and leakage. Refer to Adjustment .
  2. Check wheel alignment. Refer to Inspection .
  3. Adjust the neutral position of the steering angle sensor. Refer to Description .