LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Front Axle) >> Removal And Installation >> Front Drive Shaft Boot >> Wheel Side >> Removal and Installation >> Inspection And Adjustment After Installation

Inspection And Adjustment After Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check wheel alignment. Refer to Inspection .
  2. Adjust neutral position of the steering angle sensor. Refer to Description .
scientia non olet · About LEMON Manuals