LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 278 (Brake System) >> Removal And Installation >> Hydraulic Booster Assembly >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hydraulic Booster Assembly Replacement Components With Torque Specifications
GNSAWFIA1221Z-221Courtesy of NISSAN NORTH AMERICA, INC.

1.

Reservoir cap

2.

Reservoir tank

3.

Pin

4.

Hydraulic booster assembly

5.

Grommet

SYMBOL

Front

CAUTION: Do not spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash with water if it gets on a painted surface.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.