LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Brake Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> C1116 Stop Lamp Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STOP LAMP SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check the continuity when stop lamp switch is operated.

      Stop lamp switch

      Condition

      Continuity

      Terminal

      1 - 2

      4 - 3

      When stop lamp switch is released

      (When brake pedal is depressed)

      Yes

      When stop lamp switch is pressed

      (When brake pedal is released)

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace the stop lamp switch. Refer to Removal and Installation .