LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Seat Belts) >> Removal And Installation >> Third Row Seat Belt >> Removal and Installation >> Seat Belt Retractor - RH Seat

Seat Belt Retractor - RH Seat

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Removal 

  1. Remove the third row RH seat. Refer to Removal and Installation .
  2. Remove the seat rear floor latch cover screws, then remove the seat rear floor latch cover from the seat cushion frame. Refer to Disassembly and Assembly - RH Seat .
  3. Remove seat belt retractor lower anchor bolt (A) from the seat belt (1).
    GNSDB112831Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Front

  4. Remove the RH seat seatback trim. Refer to Disassembly and Assembly - RH Seat .
  5. Release the push pin and remove the seat belt retractor shield.
  6. Remove the seat belt retractor upper anchor bolt (A), then remove the seat belt retractor (1).
    GNSDB118429Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Front

Installation 

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals