LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Seats) >> Removal And Installation >> Front Seat >> Removal and Installation - Seat Lumbar Actuator >> Removal

Removal and Installation - Seat Lumbar Actuator: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lumbar knob.
  2. Remove the slide knob and recline knob.
  3. Remove the two screws and separate seat cushion outer finisher (LH) (1) from the seat.
    GNSDB121676Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the two lumbar actuator screws (A) and disconnect the cable (1).
    GNSALJIA0605Z-605Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove the lumbar actuator.
scientia non olet · About LEMON Manuals