LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Navigation System) >> DTC/Circuit Diagnosis >> Auxiliary Input Jack >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK AUX IN JACK HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect AV control unit connector M46 and AUX in jack connector M67.
    3. Check continuity between AV control unit connector M46 and AUX in jack connector M67.

      AV control unit

      AUX in jack

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      M46

      30

      M67

      1

      Yes

      31

      3

      32

      4

    4. Check continuity between AV control unit connector M46 and ground.

      AV control unit

      -

      Continuity

      Connector

      Terminal

      M46

      30

      Ground

      No

      32

    Is the inspection result normal?

    YES

    Replace the AUX in jack. Refer to Removal and Installation .

    NO

    Repair or replace harness or connectors.