LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Engine Control System (Symptom Diagnosis & Removal And Installation) (5.6L)) >> Removal And Installation >> Fuel Pump Control Module (FPCM) >> Removal and Installation >> Exploded View

Exploded View

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD and 2018 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GNSALBIA3275Z-275Courtesy of NISSAN NORTH AMERICA, INC.

1.

Fuel pump control module bracket

2.

Fuel pump control module

A.

Harness connector

SYMBOL

Front

REMOVAL 

CAUTION: Additional service must be performed when replacing fuel pump control module. Refer to System Description .
  1. Disconnect the harness connector from fuel pump control module.
  2. Remove bolts, and fuel pump control module and bracket assembly from vehicle.
  3. Remove screws, and fuel pump control module from fuel pump control module bracket (if necessary).