Fuel Pressure Release

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD and 2018 Nissan NV2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

WITH CONSULT

CONSULT

Turn ignition switch ON.
Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT.
Start engine.
After engine stalls, crank it two or three times to release all fuel pressure.
Turn ignition switch OFF.

WITHOUT CONSULT

CONSULT

Remove fuel pump fuse in IPDM E/R.
NOTE:
- For the fuse number, refer to Wiring Diagram .
- For the fuse arrangement, refer to IPDM E/R Terminal Arrangement .
Start engine.
After engine stalls, crank it two or three times to release all fuel pressure.
Turn ignition switch OFF.
Reinstall fuel pump fuse after servicing fuel system.