LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Control System (Introduction) (4.0L)) >> System Description >> Diagnosis System (ECM) >> On Board Diagnosis Function >> Bulb Check Mode

Bulb Check Mode

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

Description 

This function allows damage inspection in the MIL bulb (blown, open circuit, etc.).

Operation Procedure 

  1. Turn ignition switch ON.
  2. The MIL on the instrument panel should stay ON.

    If it remains OFF, check MIL circuit. Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals