LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Wiper & Washer) >> Removal And Installation >> Front Wiper Arm >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate wiper motor one full cycle, then turn "OFF" (Auto Stop).
  2. Clean up the pivot area as shown. This will reduce possibility of wiper arm looseness.
    G04084634Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install front blade assembly (LH/RH).
  4. Install front wiper arm (LH/RH).
  5. Tighten wiper arm nuts to specified torque, and install wiper arm covers.
  6. Ensure that wiper blades stop within proper clearance. Refer to Adjustment .
scientia non olet · About LEMON Manuals